
This video is part of the Double Sink Water Supply Lines Course. Options for supporting water supply lines (0:01) J-Hooks, clamps, and strapping (0:23) How to use copper strapping (1:01) How to add 5-inch by 8-inch steel boca plate (2:21)…

This video is part of the Double Sink Water Supply Lines Course. SharkBite explanation (0:01) PEX A sweat adapter (1:25) SharkBite coupling overview (1:50) Tool and supply overview (2:39) Have all the supplies and turn water off to the home…

This video is part of the Double Sink Water Supply Lines Course. Drop ear and brass nipple explanation (1:53) How to offset water supply line locations (2:45) How to cut holes into bottom plate with 1-1/4 inch bit (4:20) Stud…

This video is part of the Double Sink DWV Plumbing Course. Trap adapter overview (0:01) Parts and fitting explanation (0:35) Ensure the fitting is clean before solvent welding (1:28) Oatey Clear Cleaner is good for cleaning fittings and pipes (1:38)…

This video is part of the Double Sink DWV Plumbing Course. How to solvent weld main drain pipe (0:01) Drain connection overview in basement (1:30) How to install self-nailing stud guards (2:50) How to install 5-inch by 8-inch boca plate…

This video is part of the Double Sink DWV Plumbing Course. Always use the correct cement (0:15) ABS cement and dobber explanation (0:28) How to plan out the solvent welding process (1:17) Stir the cement for 30 seconds (3:30) Solvent…

This video is part of the Double Sink DWV Plumbing Course. Always have the vanity before building the drains (0:01) How to determine the trap adapter heights (0:30) How to cut holes for drains in studs (2:28) How to dry-fit…

This video is part of the Double Sink DWV Plumbing Course. Fitting overview (0:01) 1-1/2 inch fittings and pipe are being used (0:50) Sanitary tees should sweep downward for vents (0:58) The vertical vent was cut into above the flood…

This video is part of the Double Sink DWV Plumbing Course. Always know which code you need to follow (0:01) Single sink plumbing overview (0:48) How to cut the vertical vent (1:53) Use oscillating multi-tool and 2-inch BIM blade (3:30)…

How to get the door casing measurements (0:25) How to cut the door casings (1:28) How to pre-construct the door casing (10:54) How to use Titebond and Bessey Corner Clamps (11:30) How to nail door casing to the doorway (11:30)…

This video is part of the Demo Course. Turn the water off at shutoff valve (0:09) Remove water supply lines from shutoff valves (0:48) Untighten P-Trap from sink drain (1:07) Score silicone thatโs holding vanity top to wall and cabinet…

This video is part of the Demo Course. Turn water off at shutoff valve (0:08) Flush toilet and add LiquiLock (0:23) Remove close flange caps and nuts (0:55) Unscrew water supply line from toilet tank (2:33) Use Irwin QuickGrip or…

This video is part of the Demo Course. Turn the water off to the bathroom or home before starting (0:10) Inspect what is on the other side of the shower and be cautious (0:20) Tools and protective gear needed (1:03)…

This video is part of the Demo Course. Use a hammer to get started (0:55) Removal the tile and deck mud around the drain (3:10) How to remove a shower linerโฆsuper easy (4:00) To access this content, you must purchase…

This video is part of the Demo Course. How to use an oscillating multi-tool to make a relief cut (0:12) Remove the shower light trim (1:05) How to start the tile removal (1:28) Use a prybar to pull down the…

This video is part of the Demo Course. Use a hammer to get started (0:57) Be careful not to damage the toilet closet flange (4:10) Remove baseboards by scoring caulk and dislodging nails (5:07) How to remove cement board from…

This video is part of the Demo Course. How to start and what to consider (0:01) Circular saw tip to reduce dust (1:42) How to draw cust lines on subfloor (2:09) Set saw blade depth to slightly more than subfloor…

This video is part of the Demo Course. Measuring cut mark off the bottom plate (0:15) How to cap leaking toilet shut off valve with SharkBite (2:28) Setting circular saw to correct blade depth (4:05) Cut through 3/4 inch plywood…

This video is part of the Demo Course. Why removing subfloors is a good idea (0:10) Structural considerations with subfloors (1:35) How to determine floor joist spacing (2:10) How to approach subfloor removal (3:00) To access this content, you must…

This video is part of the Demo Course. Remove door from framing (0:25) Lean door against huge tree (just kidding, but youโll see) (1:07) Remove stationary section of door by finding screws holding it to framing (1:15) Undo any metal…

This video is part of the Demo Course. Strike a level line on drywall (0:30) Wear a silica dust respirator when cutting drywall (0:55) Use an oscillating multi-tool to cut sections of drywall (1:05) Cut the paper tape where necessary,…

This video is part of the Demo Course. How to cut old copper pipes with the AutoCut tool (0:10) How to mark the depth for SharkBite cap using Depth Gauge (1:19) How to use Ridgid deburring tool to deburr copper…

This video is part of the Curbless Shower Waterproofing Course. Wait 24 hours after waterproofing to flood test (0:05) How to build temporary curb for flood test (0:20) Position temporary curb at maximum width of shower (3:05) Use plumberโs putty…

This video is part of the Curbless Shower Waterproofing Course. First step is to waterproof the corners with KERDI-KERECK (0:05) Wipe off any excess thin-set in corners with a damp sponge (1:45) Overlap the corners with KERDI-BAND and ALL-SET by…

This video is part of the Curbless Shower Waterproofing Course. DITRA-XL is 5/16โณ thick and works with our shower tray (0:05) Always dampen the wood subfloor with a sponge (0:30) Burn thin-set (ALL-SET) into substrate with flat side of trowel…

This video is part of the Curbless Shower Waterproofing Course. Ensure drain is level and clean the shower tray substrate (0:28) Mark low spots on shower tray substrate (2:30) Add 4โณ Gripper plug to shower drain (4:55) Install the KERDI-DRAIN…

This video is part of the Curbless Shower Waterproofing Course. The KERDI-DRAIN is solvent welded to PVC or ABS (0:05) Drains can be set before the shower tray (0:20) How to size the pipe and cut it (1:28) Use DEB4…

This video is part of the Curbless Shower Waterproofing Course. Before mixing thin-set dry-fit shower tray and cut banding (0:28) Cut the uncoupling membrane and any KERDI or KERDI-BAND being used to waterproof it (2:00) Try to extend waterproofing at…

This video is part of the Curbless Shower Waterproofing Course. KERDI-FIX only waterproofs when between two layers of fleece (0:27) Apply KERDI-FIX between the KERDI and Schluter niche (1:45) Smooth application using a joint-compound knife (2:29) Use denatured alcohol to…

This video is part of the Curbless Shower Waterproofing Course. Overlap prior wall by at least 2-inches (0:05) Dampen cement board before thin-set application (0:28) Trowel thin-set onto KERDI using KERDI trowel (0:50) Use 6-inch joint compound knife to key…

This video is part of the Curbless Shower Waterproofing Course. Do final inspection of screws (0:05) Cutting KERDI membrane (1:42) How to mix Schluter ALL-SET for membrane (2:18) ALWAYS dampen the substrate, especially cement board (4:15) Burn thin-set into the…

This video is part of the Curbless Shower Waterproofing Course. Position tapered edge of drywall next to backer board (0:05) Use coarse-threaded drywall screws every 12-inches for wood framing (0:45) Ensure screws are below the paper surface and dimpled (2:05)…

This video is part of the Curbless Shower Waterproofing Course. Fix any deflection in the subfloor prior to Feather Finish (0:15) Inspect subfloor for low spots (1:00) Mix 2 parts Feather Finish to 1 part water (2:45) Apply Feather Finish…

This video is part of the Curbless Shower Waterproofing Course. Use Ardex or Henry Feather Finish (0:10) Always measure the Feather Finish and cold clean water (0:30) Identify low spots (1:20) Dampen the wood subfloor (2:00) Use steel finishing trowel…

This video is part of the Curbless Shower Waterproofing Course. Get measurements for functional shower tray space (0:55) How to cut down a Schluter shower tray (1:44) Double-check the shower tray sits level in the shower area (4:25) Exterior floor…

This video is part of the Curbless Shower Waterproofing Course. Use 1/4โณ strips of plywood between the subfloor and first row (0:40) On-center spacing for DuRock screws is every 8-inches (1:17) Cement board can be cut with sharp utility knives…

This video is part of the Curbless Shower Waterproofing Course. Wear long sleeve clothing and use a respirator (0:10) Shop vac inside the wallsโฆclean up when you can!! (0:50) How to install Rockwool Comfort Batt (1:19) How to add blocking…

This video is part of the Curbless Shower Waterproofing Course. Studs need to be at most 16-inches on-center for 1/2-inch backer board (0:10) Framing can adversely affect backer board and tile work (0:25) Check every stud bay to ensure theyโre…

This video is part of the Curbless Shower Waterproofing Course. Get height from bottom plate to top plate (0:20) Recess stud 3/4โณ behind existing drywall (1:00) Ensure new stud is even with rest of studs (1:20) Use 16d or 3-inch…

This video is part of the Curbless Shower Waterproofing Course. If studs are not even with each other they can be planed (0:32) Use an electric planer to plane down studs (0:50) Remove any screws or nails from studs prior…

This video is part of the Curbless Shower Framing Course. Always inspect the levelness of floor joists (1:30) How to sister new 2x material to floor joists (3:14) Use either 16d nails or 3-inch construction screws with PL400 to secure…

This video is part of the Curbless Shower Framing Course. How to make custom 2ร4 support (0:15) How to install 2ร4 support for drain (1:49) To access this content, you must purchase Home Repair Tutor Subscription.

This video is part of the Curbless Shower Framing Course. Toilet plumbing rough-in (0:24) Shower drain plumbing rough-in (1:49) Shower drains are required by code to be at least 2-inches (2:25) Cap the shower and toilet riser pipes to prevent…

This video is part of the Curbless Shower Framing Course. The maximum plywood hole diameter for Schluter KERDI-DRAINs is 5 inches (0:05) How to center the drain hole inside the shower (0:41) How to use the KERDI-DRAIN template for the…

This video is part of the Curbless Shower Framing Course. Joist overview for curbless shower construction (0:20) Curbless showers require 3/4โณ plywood to be flush with the top of joists (0:35) Recessed plywood has to be supported on all four…

This video is part of the Curbless Shower Framing Course. Check to see if you have screws or nails (0:50) Make relief cuts in plywood for shower drain (1:45) Use long pry bar to remove plywood from floor joists (2:17)…

This video is part of the Curbless Shower Framing Course. Your options for subfloor are ripping out, repairing, or self-leveling (0:10) Assess levelness and flatness with largest level possible (0:40) How to assess subfloor in shower area (4:00) To access…

This video is part of the Curbed Shower Waterproofing Course. Use either 2โณ or 4โณ Oatey Gripper drain plug (0:15) Fill shower tray up to top of KERDI-BAND covering wall to tray seam (2:08) Use SharkBite washing machine valve on…

This video is part of the Curbed Shower Waterproofing Course. Make custom inside corners with KERDI (0:11) Install custom inside corners to curb and wall transition (0:50) Waterproof DITRA and drywall transitions (2:20) Waterproof between sheets of DITRA (8:48) To…

This video is part of the Curbed Shower Waterproofing Course. Use KERDI-BAND to waterproof between prefab curbs and trays (0:13) Use KERDI to waterproof between custom curbs and trays (0:49) Measure and cut KERDI for custom curb (1:05) Have 2โณ…

This video is part of the Curbed Shower Waterproofing Course. Dry-fitting and cutting DITRA (0:59) Shop vac and whipe down substrate with damp sponge (2:35) Apply thin-set to substrate with margin trowel (3:15) Key thin-set into substrate with flat side…

This video is part of the Curbed Shower Waterproofing Course. What is DITRA and why is it important (0:10) What kind of trowels are needed for DITRA (1:05) DITRA Trowel 1/4โณ x 3/16โณ V-Notched Trowel Tools and Materials Wood float…

This video is part of the Curbed Shower Waterproofing Course. Waterproofing main shower wall and tray transition (0:55) Apply ALL-SET with 6โณ joint compound knife (2:10) Trowel thin-set with KERDI trowel (3:40) Embed KERDI-BAND against wall and tray, overlapping both…

This video is part of the Curbed Shower Waterproofing Course. Precut vertical pieces of KERDI-BAND for corners (0:35) Use 4โณ joint compound knife to apply first layer of ALL-SET in corners (1:57) Trowel ALL-SET with KERDI trowel and embed KERDI-BAND…

This video is part of the Curbed Shower Waterproofing Course. Shop vac the shower tray (0:11) Dampen dry pack with sponge and apply ALL-SET (1:00) Trowel ALL-SET with KERDI trowel (1:51) Embed KERDI-KERECK inside corner (2:20) Wipe off excess thin-set…

This video is part of the Curbed Shower Waterproofing Course. Tools and materials (0:33) Schluter KERDI trowel Margin trowel 2โณ Joint compound knife, 4โณ knife, 6โณ knife KERDI-BAND KERDI-KERECK inside and outside corners Mixing valve seal Pipe seal Shower tray…

This video is part of the Curbed Shower Waterproofing Course. Mix partial bag of ALL-SET (0:01) Weigh bag on scale and divide weight into 50, e.g. 14.4/50 = 0.29 (0:26) Multiply 0.29 times by high-end of water content for membranes,…

This video is part of the Curbed Shower Waterproofing Course. Add extra drywall next to the plumbing wall KERDI-BOARD (0:10) Have tapered seam face adjacent drywall (0:55) Corner bead installation (2:55) To access this content, you must purchase Home Repair…

This video is part of the Curbed Shower Waterproofing Course. Mapei 4-to-1 Mud Bed Mix Overview (0:01) Use 1 quart of water for half bags and 2 quarts of water for full bag (0:25) Measure, weigh, and mix dry pack…

This video is part of the Curbed Shower Waterproofing Course. Measure water for ALL-SET (0:12) Use Collomix Dust EX with shop vac (0:50) Weigh ALL-SET in zeroed out bucket (0:55) Mix thin-set with Collomix X01 and birdcage paddle (1:40) Clean…

This video is part of the Curbed Shower Waterproofing Course. Tools and materials (0:20) Dry-fit the shower tray (1:48) Dry-fit the curb (4:00) Get measurements to cut curb width (4:12) Cut down width of curb with 7-1/4โณ circular saw (6:40)…

This video is part of the Curbed Shower Waterproofing Course. Mixing Schluter ALL-SET mortar (0:12) Cuttng Schluter shower tray foam support and cleaning floor (1:29) Applying Oatey PVC primer and PVC cement (2:10) Setting Schluter KERDI-DRAIN on riser pipe (2:51)…

This video is part of the Curbed Shower Waterproofing Course. Removing foam insert from shower tray (0:18) Choosing the correct spacers for the drain (0:40) Cutting riser pipe down to smaller height (1:39) Using internal pipe cutter to cut down…

This video is part of the Curbed Shower Waterproofing Course. Building 2ร4 P-Trap support (0:17) Installing P-Trap support under pipes (1:35) Dry-fitting plywood (2:52) NOTE: This drain was for a curbless shower but the P-Trap support is the same for…

This video is part of the Curbed Shower Waterproofing Course. General overview of KERDI-DRAIN (0:16) KERDI-DRAIN Grate Kit (1:52) DeWALT Plumbing Code reference book (3:26) Shower drain configuration (3:43) Oatey primer and cement options (6:14) Reed PVC pipe cutter (6:59)…

This video is part of the Curbed Shower Waterproofing Course. Setting first board on main wall (0:27) Adding second row over wet shimming (2:43) Setting last row of board at ceiling on main wall (5:56) Fitting prefab shower niche into…

This video is part of the Curbed Shower Waterproofing Course. Use Schluter ALL-SET to wet shim (0:05) Use a margin trowel and KERDI trowel (0:35) Mixing ALL-SET for wet shimming (1:11) Mark stud positions on floor and ceiling (2:50) How…

This video is part of the Curbed Shower Waterproofing Course. Schluter KERDI-BOARD Kits are good for showers or tubs (0:01) Roughly 101 square feet of board comes in the kit (0:47) 140 screws and washers (1:15) 2 tubes of KERDI-FIX…

This video is part of the Curbed Shower Waterproofing Course. Tools needed to cut down Schluter curb (0:47) Referencing story pole to cut down curb height (1:18) Plumbing code requirements for shower curbs (6:08) Cutting down shower curb height (6:38)…

This video is part of the Curbed Shower Waterproofing Course. Tools needed to cut tray (0:18) Dry-fitting shower tray (1:18) Why itโs best to cut off and save the first 3/4โณ (2:30) Cutting off the first 3/4โณ of the perimeter…

This video is part of the Curbed Shower Waterproofing Course. Why priming gypsum-based products is necessary (0:07) First Ardex P51 Primer application (0:49) Second Ardex P51 Primer application (4:55) To access this content, you must purchase Home Repair Tutor Subscription.

This video is part of the Curbed Shower Waterproofing Course. Stud wall inspection (0:12) Story pole and shower niche location (0:47) Drawing shower niche reference marks on story pole and studs (2:28) Cutting studs with a circular saw and speed…

This video is part of the Curbed Shower Waterproofing Course. Dry fit prefab shower tray (0:15) Set up story pole with cardboard, plywood or drywall (0:45) Tile explanation for story pole (1:57) Understanding shower tray tile thickness (2:45) Factoring in…

This video is part of the Curbed Shower Waterproofing Course. Thin-set mortar selection, use Schluter ALL-SET if possible (0:18) Schluter shower trays (1:28) Prefab shower curbs (2:49) KERDI-DRAIN for ABS or PVC pipes (3:45) Drain Grate Kit (6:30) Screws and…

This video is part of the Bathtub Shower Wall Waterproofing Course. Outline tile thickness on tub for tape (0:40) Apply painterโs tape to top of tub (1:35) How to mix a partial back of Schluter ALL-SET (2:40) How to waterproof…

This video is part of the Bathtub Shower Wall Waterproofing Course. How to create a KERDI-BAND template (0:25) How to use copper and SharkBite washing machine valve (0:50) How to quickly cut lengths of KERDI-BAND (1:29) How to quickly cut…

This video is part of the Bathtub Shower Wall Waterproofing Course. Cut all the KERDI-BAND to size before mixing thin-set mortar (0:25) KERDI-BAND (0:49) KERDI Trowel (1:39) Pipe Seals and Mixing Valve Seals (1:49) Blue Painterโs Tape (2:25) KERDI-FIX in…

This video is part of the Bathtub Shower Wall Waterproofing Course. How to attach KERDI-BOARD to the main shower wall (0:25) Embed KERDI-BOARD into KERDI-FIX within 10 minutes of application (1:39) Add screws and washers every 12 inches along 16-inch…

This video is part of the Bathtub Shower Wall Waterproofing Course. KERDI-BOARD explanation (0:15) Screws and washers (1:35) KERDI-BAND, Mixing Valve Seal, and Pipe Seals (2:05) KERDI-FIX and painterโs tape (3:14) Impact driver or drill with a tape measure (3:39)…

This video is part of the Bathtub Shower Wall Waterproofing Course. NOTE: Only build shower niches on interior walls The planning process of shower niches (0:45) How to add blocking for a custom shower niche (2:55) How to inspect studs…

This video is part of the Bathtub Shower Wall Waterproofing Course. Reason for furring shower walls (0:28) How to determine furring strip thickness (1:19) How to cut furring strips (3:46) How to protect bathtubs (7:45) How to install furring strips…

This video is part of the Bathtub Shower Valve and Diverter with PEX B Course. How to clean copper pipe (0:20) How to determine where to cut copper (1:20) How to cut and prep copper pipe (2:10) How to install…

This video is part of the Bathtub Shower Valve and Diverter with PEX B Course. Location recommendation (0:13) How to use Calidad 1/4 inch diamond hole saw (2:11) How to use anchors inside tile wall (4:40) How to apply 100%…

This video is part of the Bathtub Shower Valve and Diverter with PEX B Course. How to remove brass nipple (0:50) Clean drop ear with wire fitting brush (1:33) Pipe nipple length recommendation (2:00) How to add Fastape to pipe…

This video is part of the Bathtub Shower Valve and Diverter with PEX B Course. How to remove bonnet nut (0:15) How the diverter cartridge works (0:50) How to install diverter cartridge (1:25) How to install threaded sleeve (1:34) How…

This video is part of the Bathtub Shower Valve and Diverter with PEX B Course. Turn the water off to the house and drain the system (0:21) Remove bonnet nut from valve with wrench (0:30) Remove screen from inside valve…

This video is part of the Bathtub Shower Valve and Diverter with PEX B Course. Tools and supplies (0:49) How to install main shower valve (4:49) How to install diverter valve (15:24) How to install shower head drop ear (32:48)…

This video is part of the Bathtub Shower Valve and Diverter with PEX A Course. How to plan location of Delta diverter valve (0:01) How to prep Delta diverter valve for PEX A (0:48) How to connect PEX A water…

This video is part of the Bathtub Shower Valve and Diverter with PEX A Course. NOTE: only use copper for the tub spout, NOT PEX Ensure studs are even and plumb (0:29) How to plan wood blocking for valve (1:29)…

This video is part of the Bathtub Shower Valve and Diverter with PEX A Course. Cap the right-hand port of the Delta diverter valve if using only 3 functions (0:18) Remove the bonnet nut and plug before soldering (1:10) How…

This video is part of the Bathtub Shower Valve and Diverter with PEX A Course. Different Delta shower valves for bathtubs (0:15) Delta R10000-UNBX MultiChoice rough-in valve (0:34) Delta R10000-PFT-MF MultiChoice rough-in valve for PEX A (1:17) Delta R10000-PFT-PX MultiChoice…

This video is part of the Bathtub Shower Valve with PEX A Course. How to remove brass nipple from drop ear fitting (0:14) Use the Knipex Pliers Wrench with Jaw Protectors (0:17) How to prep shower arm with Fastape and…

This video is part of the Bathtub Shower Valve with PEX A Course. Universal adapter explanation (0:01) How to cut copper pipe for adapter (0:26) How to prep copper pipe for adapter (1:16) How to install adapter and tub spout…

This video is part of the Bathtub Shower Valve with PEX A Course. How to install the Delta cartridge (0:12) How to install the sleeve and escutcheon (2:15) How to install the handle (4:26) To access this content, you must…

This video is part of the Bathtub Shower Valve with PEX A Course. Delta bathtub shower valve overview (R10000-PFT-MF) (0:01) Stud tips for shower valve installation (0:25) Wood blocking location for valve (1:28) Valve location and height (2:00) Ensure wood…

This video is part of the Bathtub Installation Course. NOTE: Wait for your solvent welded pipes to cure before testing, please reference this Oatey Solvent Weld Cure Time chart for more details Connect a hose to copper test plug with…

This video is part of the Bathtub Installation Course. Overview of bath waste kit installation (0:15) How to chamfer pipes with DEB4 (3:40) Dry fit the drain spud and elbow to the tub with the drain removal tool (6:50) Dry…

This video is part of the Bathtub Installation Course. Oatey/Dearborn True Blue bath waste kits (0:30) True Blue FLEX PVC bath waste option (1:05) ABS bath waste option (1:45) How to use FLEX PVC with ABS (2:25) Oatey cleaner, primer,…

This video is part of the Bathtub Installation Course. How to remove 2ร4 blocking (0:01) Remove remaining silicone and silicone (0:20) Remove excess Great Stuff from the drain area (0:40) Self-Leveling and how it works with bathroom floor tile (0:48)…

This video is part of the Bathtub Installation Course. Ardex Liquid Backer Board doesnโt require metal lath over plywood (0:02) The Collomix AQIX helps measure water (0:30) The Collomix Dust EX helps reduce dust (1:58) Pour Ardex Liquid Backer Board…