-
How to Feather Finish Shower Floor (Curbless Shower)
This video is part of the Curbless Shower Waterproofing Course. Use Ardex or Henry Feather Finish (0:10) Always measure the Feather Finish and cold clean water (0:30) Identify low spots (1:20) Dampen the wood subfloor (2:00) Use steel finishing trowel…
-
Joist and Subfloor Repairs (Curbless Shower)
This video is part of the Curbless Shower Framing Course. Always inspect the levelness of floor joists (1:30) How to sister new 2x material to floor joists (3:14) Use either 16d nails or 3-inch construction screws with PL400 to secure…
-
How to Cut Schluter Drain Hole in Plywood (Curbless Shower)
This video is part of the Curbless Shower Framing Course. The maximum plywood hole diameter for Schluter KERDI-DRAINs is 5 inches (0:05) How to center the drain hole inside the shower (0:41) How to use the KERDI-DRAIN template for the…
-
How to Recess Shower Subfloors (Curbless Shower)
This video is part of the Curbless Shower Framing Course. Joist overview for curbless shower construction (0:20) Curbless showers require 3/4โณ plywood to be flush with the top of joists (0:35) Recessed plywood has to be supported on all four…
-
How to Remove Shower Wood Subfloors (Curbless Shower)
This video is part of the Curbless Shower Framing Course. Check to see if you have screws or nails (0:50) Make relief cuts in plywood for shower drain (1:45) Use long pry bar to remove plywood from floor joists (2:17)…
-
How to Inspect Wood Subfloors (Curbless Shower)
This video is part of the Curbless Shower Framing Course. Your options for subfloor are ripping out, repairing, or self-leveling (0:10) Assess levelness and flatness with largest level possible (0:40) How to assess subfloor in shower area (4:00) To access…