
This video is part of the Schluter KERDI-DRAIN Installation (ABS Start to Finish) Course. Shower drain P-Trap configuration (0:13) How to dry-fit P-Trap and fittings (1:16) How to cut ABS with Reed quick-release cutter (4:30) How to deburr ABS with…

This video is part of the Curbed Shower Waterproofing Course. Setting first board on main wall (0:27) Adding second row over wet shimming (2:43) Setting last row of board at ceiling on main wall (5:56) Fitting prefab shower niche into…

This video is part of the Curbed Shower Waterproofing Course. Use Schluter ALL-SET to wet shim (0:05) Use a margin trowel and KERDI trowel (0:35) Mixing ALL-SET for wet shimming (1:11) Mark stud positions on floor and ceiling (2:50) How…

This video is part of the Curbed Shower Waterproofing Course. Schluter KERDI-BOARD Kits are good for showers or tubs (0:01) Roughly 101 square feet of board comes in the kit (0:47) 140 screws and washers (1:15) 2 tubes of KERDI-FIX…

This video is part of the Bathtub Shower Wall Waterproofing Course. Outline tile thickness on tub for tape (0:40) Apply painterโs tape to top of tub (1:35) How to mix a partial back of Schluter ALL-SET (2:40) How to waterproof…

This video is part of the Bathtub Shower Wall Waterproofing Course. Cut all the KERDI-BAND to size before mixing thin-set mortar (0:25) KERDI-BAND (0:49) KERDI Trowel (1:39) Pipe Seals and Mixing Valve Seals (1:49) Blue Painterโs Tape (2:25) KERDI-FIX in…

This video is part of the Bathtub Shower Wall Waterproofing Course. How to attach KERDI-BOARD to the main shower wall (0:25) Embed KERDI-BOARD into KERDI-FIX within 10 minutes of application (1:39) Add screws and washers every 12 inches along 16-inch…

This video is part of the Bathtub Shower Wall Waterproofing Course. KERDI-BOARD explanation (0:15) Screws and washers (1:35) KERDI-BAND, Mixing Valve Seal, and Pipe Seals (2:05) KERDI-FIX and painterโs tape (3:14) Impact driver or drill with a tape measure (3:39)…