-
Cutting Shower Niche Metal Profile
This video is part of the Tile Shower Walls (3ร6 Subway & Niche) Course. Schluter JOLLY, RONDEC, QUADEC are great options for niches (0:03) Start with measuring the bottom piece (0:59) Use Diablo 10โณ Laminate Non-Ferrous Blade (84T) for aluminum…
-
Shower Niche Installation
This video is part of the Tile Shower Walls (12ร24 with Niche) Course. Shower niche tiling sequence explained (0:20) Ardex X77 thin-set mortar was used (1:29) How to install Schluter JOLLY metal profile (2:45) How to install shower niche sill…
-
Setting Last Column of Plumbing Wall
This video is part of the Tile Shower Walls (12ร24 with Niche) Course. Continue tile wall pattern (0:01) Place 1/16โณ horseshoe shims between tile and DECO-SG (7:40) How to notch tile around DECO-SG to continue the pattern (10:01) How measure,…
-
How to Dry-Fit Schluter JOLLY for Niche
This video is part of the Tile Shower Walls (12ร24 with Niche) Course. How to measure the niche for JOLLY (0:58) How to cut metal profiles with the miter saw (1:20) How to safely cut miters on the miter saw…
-
Drywall Finishing Tip Next to JOLLY
This video is part of the Tile Shower Walls (12ร24 with Niche) Course. Tape edge of Schluter metal profile with Frog Tape (0:40) Apply setting-type joint compound (45 minutes) with 6-inch knife (1:16) Remove high spots with a joint compound…
-
Completing Side Wall Tile
This video is part of the Tile Shower Walls (12ร24 with Niche) Course. Continue to focus on tile pattern while setting tiles (0:01) Have base plates and T-Lock wedges face the adjacent tile (3:00) How to cut Schluter JOLLY metal…